top of page
Search


BMC Streetfire SS02 (4) - Alt Bar upgrade
(continued from Part 3) As mentioned, I have another lightweight road or racing bike, which is based on my Fastrax Scandium frame. While this bike is light and nimble, the BMC, possibly due to its larger size, feels a bit more sluggish, regardless of the rim or tire combination I use. Although both bikes complement each other, I decided to build the BMC with a different setup, featuring a straight handlebar to enhance comfort and versatility. My small 'M' Handlebar Setup S
Gerhard Wanninger
Nov 25, 20256 min read
Â
Â
Â


My Wheeler mountain winter/commuter bike (2)
(continued from part 1) Braking Lever: Tektro I am using my vintage Taiwanese mountain bike Tektro 4-finger brake levers, which are made from aluminum. Many people might not realize that during the 1990s, there were also lighter 2-finger levers available. However, I find these narrower levers uncomfortable for road cycling or long tours. Like many older aluminum components, the paint on these parts tends to peel. While some may see this as unattractive, I appreciate it as a s
Gerhard Wanninger
Dec 2, 20245 min read
Â
Â
Â


My Wheeler Mountain Winter Bike (1)
Alongside my racing and endurance road bikes, I've decided I need a practical bike equipped with a sturdy rear carrier for activities like shopping and recycling paper and metal waste. In Taiwan, the country I love, everyone has the opportunity to collect and sell metal waste. This not only helps the environment but also allows people to earn a little money while cycling—just like a professional bike rider. After converting my 26-inch mountain bike into a 700c road bike, I ro
Gerhard Wanninger
Nov 26, 20245 min read
Â
Â
Â


BMC Streetfire SS02 (2)
( continued from page 1 ) -Steering a. Handlebar I installed my old 3T handlebar on the new bike. At 44 cm (center to center), it's on the wider side; I usually prefer bars that are 42 cm or even 40 cm wide. I plan to swap it out in the future when I change my handlebar tape. Update : With the new bar tape, I replaced the 3T with an older basic Deda RHM (Rapid Handlebar Movement) handlebar from my parts bin. Although it also measures 44 cm wide, the drops aren't as pronounced
Gerhard Wanninger
Jul 25, 20243 min read
Â
Â
Â


BMC Streetfire SS02 (1) - the Built!
The past few weeks have gone by incredibly quickly. We've been dealing with COVID-19, I had a bike accident that left me with a rather unusual injury, and I've been busy working for my company. Additionally, we experienced the largest earthquake in Taiwan in the last 25 years. All of these events kept me occupied, which may explain my absence from writing on this blog for some time. Some Background and the Plan The aforementioned bike accident deformed the head tube of my 'It
Gerhard Wanninger
Apr 19, 20244 min read
Â
Â
Â


Riding in the Rain (1)
Many people already realized that the summer is over - however sad it might sound. Gone are the days of sunshine at the beach, the summer holidays have come to an end - there are only memories of a carefree time, full of fun and excitement remain in the mind, photos, and maybe even some movies. Born and raised in central Europe I really had once tears in my eyes returning from a sunny summer holiday back to school. The same day I had a fight with a classmate which I won but s
Gerhard Wanninger
Sep 3, 20234 min read
Â
Â
Â


Converting a 26" Mountain Bike into a 700c Bike
A few weeks ago, I damaged my 700c steel race bike frame which I bought as a NOS (New Old Stock) without any warranty. It was hurt to the...
Gerhard Wanninger
Apr 25, 20234 min read
Â
Â
Â


Scandium 'Fastrax' Race Bike Build (3)
(Continued from 2nd part ) Reality Check For the complete build, I spent around ~US$ 895.00; the race-ready bike (incl. two bottle cages...
Gerhard Wanninger
Sep 2, 20223 min read
Â
Â
Â


Scandium 'Fastrax' Race Bike Build (2)
The Canvas As mentioned before , this particular build originally had only: - a frame, 56 cm made of Scandium (1.200 grams) - a carbon...
Gerhard Wanninger
Jun 1, 20214 min read
Â
Â
Â


Scandium 'Fastrax' Race Bike Build (1)
Background , 'Old' NOS KHS Alloy 7005 Frame A few years back, I purchased a 58cm 'KHS' 7005 aluminum frame featuring carbon rear and...
Gerhard Wanninger
May 29, 20214 min read
Â
Â
Â


My 'Italian Style' new Bike Built (2)
My New Ride A few months ago, I 'accidentally' came across a Reynolds 853 steel frame with carbon rear stays and a full carbon fork. This frame was New Old Stock (NOS) in red with white accents. After some negotiation, I bought it from a website but decided to let it sit for a while before using it. The unique red and white color scheme was one of the main reasons I decided to purchase this bike. The dominant red color reminds me of a famous Italian motorcycle company in Bolo
Gerhard Wanninger
Dec 14, 20202 min read
Â
Â
Â


My 'Italian Style' new Bike Built (1)
Bonjorno, welcome to my homepage! End of the Year The year 2020 comes slowly to an end, and what year it was! Not many people understood the meaning of a 'pandemic' only until before it affected their own life. With the 'China Virus' or 'COVID-19', the world stumbled into an unprecedented situation. This left a certain American president not only confused but in stubborn denial of scientific expertise, covering his inability by smearing campaigns discrediting scientists blami
Gerhard Wanninger
Jul 9, 20205 min read
Â
Â
Â
bottom of page
